Shrinkage

Apply shrinkage values to an object.

	Toolbar	Manufacturing > Shrinkage
	Menu	Manufacturing > Shrinkage
	Command	MoldShrinkage

Steps:

1. Select the objects to analyze.

It will show the sizes; the original model and the scaled model.

By default, it uses the center point of the model. If you uncheck it, it will use the CPlane origin.

2. Select the material:

It will show the shrinkage range, in this case, 0.5% to 0.7%. It will use the average value between the minimum and maximum. In this case, it will use 0.6%. You can apply a different in the three directions.

RhinoMold will show the shrinkage model in orange.